/* * File name：RFID.pde * Creator：Dr.Leong ( WWW.B2CQSHOP.COM ) * Creation date：2011.09.19 * Modified by： Eng. Robson (robson.eletronico@gmail.com) * Modified date： 2013.09.10 * Modified： Translation from Chinese to English (by google) * Functional Description：Mifare1 Anti-collision find cards → → → Select card reader interface */ // the sensor communicates using SPI, so include the library: #include <SPI.h> #define uchar unsigned char #define uint unsigned int //Maximum length of the array #define MAX_LEN 16 ///////////////////////////////////////////////////////////////////// //set the pin ///////////////////////////////////////////////////////////////////// const int chipSelectPin = 10; const int NRSTPD = 5; //MF522 Command word #define PCD_IDLE 0x00 //NO action; Cancel the current command #define PCD_AUTHENT 0x0E //Authentication Key #define PCD_RECEIVE 0x08 //Receive Data #define PCD_TRANSMIT 0x04 //Transmit data #define PCD_TRANSCEIVE 0x0C //Transmit and receive data, #define PCD_RESETPHASE 0x0F //Reset #define PCD_CALCCRC 0x03 //CRC Calculate // Mifare_One card command word # define PICC_REQIDL 0x26 // find the antenna area does not enter hibernation # define PICC_REQALL 0x52 // find all the cards antenna area # define PICC_ANTICOLL 0x93 // anti-collision # define PICC_SElECTTAG 0x93 // election card # define PICC_AUTHENT1A 0x60 // authentication key A # define PICC_AUTHENT1B 0x61 // authentication key B # define PICC_READ 0x30 // Read Block # define PICC_WRITE 0xA0 // write block # define PICC_DECREMENT 0xC0 // debit # define PICC_INCREMENT 0xC1 // recharge # define PICC_RESTORE 0xC2 // transfer block data to the buffer # define PICC_TRANSFER 0xB0 // save the data in the buffer # define PICC_HALT 0x50 // Sleep //And MF522 The error code is returned when communication #define MI_OK 0 #define MI_NOTAGERR 1 #define MI_ERR 2 //------------------MFRC522 Register--------------- //Page 0:Command and Status #define Reserved00 0x00 #define CommandReg 0x01 #define CommIEnReg 0x02 #define DivlEnReg 0x03 #define CommIrqReg 0x04 #define DivIrqReg 0x05 #define ErrorReg 0x06 #define Status1Reg 0x07 #define Status2Reg 0x08 #define FIFODataReg 0x09 #define FIFOLevelReg 0x0A #define WaterLevelReg 0x0B #define ControlReg 0x0C #define BitFramingReg 0x0D #define CollReg 0x0E #define Reserved01 0x0F //Page 1:Command #define Reserved10 0x10 #define ModeReg 0x11 #define TxModeReg 0x12 #define RxModeReg 0x13 #define TxControlReg 0x14 #define TxAutoReg 0x15 #define TxSelReg 0x16 #define RxSelReg 0x17 #define RxThresholdReg 0x18 #define DemodReg 0x19 #define Reserved11 0x1A #define Reserved12 0x1B #define MifareReg 0x1C #define Reserved13 0x1D #define Reserved14 0x1E #define SerialSpeedReg 0x1F //Page 2:CFG #define Reserved20 0x20 #define CRCResultRegM 0x21 #define CRCResultRegL 0x22 #define Reserved21 0x23 #define ModWidthReg 0x24 #define Reserved22 0x25 #define RFCfgReg 0x26 #define GsNReg 0x27 #define CWGsPReg 0x28 #define ModGsPReg 0x29 #define TModeReg 0x2A #define TPrescalerReg 0x2B #define TReloadRegH 0x2C #define TReloadRegL 0x2D #define TCounterValueRegH 0x2E #define TCounterValueRegL 0x2F //Page 3:TestRegister #define Reserved30 0x30 #define TestSel1Reg 0x31 #define TestSel2Reg 0x32 #define TestPinEnReg 0x33 #define TestPinValueReg 0x34 #define TestBusReg 0x35 #define AutoTestReg 0x36 #define VersionReg 0x37 #define AnalogTestReg 0x38 #define TestDAC1Reg 0x39 #define TestDAC2Reg 0x3A #define TestADCReg 0x3B #define Reserved31 0x3C #define Reserved32 0x3D #define Reserved33 0x3E #define Reserved34 0x3F //----------------------------------------------- //4 bytes card serial number, the first 5 bytes for the checksum byte uchar serNum[5]; uchar writeData[16]={0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 100}; //Initialization 100 dollars uchar moneyConsume = 18 ; //Consumption of 18 yuan uchar moneyAdd = 10 ; //Recharge 10 yuan //Sector A password, 16 sectors, each sector password 6Byte uchar sectorKeyA[16][16] = {{0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}, {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}, //{0x19, 0x84, 0x07, 0x15, 0x76, 0x14}, {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}, }; uchar sectorNewKeyA[16][16] = {{0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}, {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xff,0x07,0x80,0x69, 0x19,0x84,0x07,0x15,0x76,0x14}, //you can set another ket , such as " 0x19, 0x84, 0x07, 0x15, 0x76, 0x14 " //{0x19, 0x84, 0x07, 0x15, 0x76, 0x14, 0xff,0x07,0x80,0x69, 0x19,0x84,0x07,0x15,0x76,0x14}, // but when loop, please set the sectorKeyA, the same key, so that RFID module can read the card {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xff,0x07,0x80,0x69, 0x19,0x33,0x07,0x15,0x34,0x14}, }; void setup() { Serial.begin(9600); // RFID reader SOUT pin connected to Serial RX pin at 2400bps // start the SPI library: SPI.begin(); pinMode(chipSelectPin,OUTPUT); // Set digital pin 10 as OUTPUT to connect it to the RFID /ENABLE pin digitalWrite(chipSelectPin, LOW); // Activate the RFID reader pinMode(NRSTPD,OUTPUT); // Set digital pin 10 , Not Reset and Power-down digitalWrite(NRSTPD, HIGH); MFRC522_Init(); } void loop() { uchar i,tmp, checksum1; uchar status; uchar str[MAX_LEN]; uchar RC_size; uchar blockAddr; //Selection operation block address 0 to 63 String mynum = ""; //Find cards, return card type status = MFRC522_Request(PICC_REQIDL, str); if (status == MI_OK) { Serial.println("Card detected"); Serial.print(str[0],BIN); Serial.print(" , "); Serial.print(str[1],BIN); Serial.println(" "); } //Anti-collision, return card serial number 4 bytes status = MFRC522_Anticoll(str); memcpy(serNum, str, 5); if (status == MI_OK) { checksum1 = serNum[0] ^ serNum[1] ^ serNum[2] ^ serNum[3]; Serial.println("The card's number is : "); Serial.print(2); Serial.print(serNum[0]); Serial.print(" , "); Serial.print(serNum[1],BIN); Serial.print(" , "); Serial.print(serNum[2],BIN); Serial.print(" , "); Serial.print(serNum[3],BIN); Serial.print(" , "); Serial.print(serNum[4],BIN); Serial.print(checksum1); Serial.print(3); Serial.println(" "); // Should really check all pairs, but for now we'll just use the first if(serNum[0] == 88) { Serial.println("Hello Grant"); } else if(serNum[0] == 173) { Serial.println("Hello David"); } delay(1000); } //Serial.println(" "); MFRC522_Halt(); //Command card into hibernation } /* * Function Name：Write_MFRC5200 * Function Description: To a certain MFRC522 register to write a byte of data * Input Parameters：addr - register address; val - the value to be written * Return value: None */ void Write_MFRC522(uchar addr, uchar val) { digitalWrite(chipSelectPin, LOW); //Address Format：0XXXXXX0 SPI.transfer((addr<<1)&0x7E); SPI.transfer(val); digitalWrite(chipSelectPin, HIGH); } /* * Function Name：Read_MFRC522 * Description: From a certain MFRC522 read a byte of data register * Input Parameters: addr - register address * Returns: a byte of data read from the */ uchar Read_MFRC522(uchar addr) { uchar val; digitalWrite(chipSelectPin, LOW); //Address Format：1XXXXXX0 SPI.transfer(((addr<<1)&0x7E) | 0x80); val =SPI.transfer(0x00); digitalWrite(chipSelectPin, HIGH); return val; } /* * Function Name：SetBitMask * Description: Set RC522 register bit * Input parameters: reg - register address; mask - set value * Return value: None */ void SetBitMask(uchar reg, uchar mask) { uchar tmp; tmp = Read_MFRC522(reg); Write_MFRC522(reg, tmp | mask); // set bit mask } /* * Function Name: ClearBitMask * Description: clear RC522 register bit * Input parameters: reg - register address; mask - clear bit value * Return value: None */ void ClearBitMask(uchar reg, uchar mask) { uchar tmp; tmp = Read_MFRC522(reg); Write_MFRC522(reg, tmp & (~mask)); // clear bit mask } /* * Function Name：AntennaOn * Description: Open antennas, each time you start or shut down the natural barrier between the transmitter should be at least 1ms interval * Input: None * Return value: None */ void AntennaOn(void) { uchar temp; temp = Read_MFRC522(TxControlReg); if (!(temp & 0x03)) { SetBitMask(TxControlReg, 0x03); } } /* * Function Name: AntennaOff * Description: Close antennas, each time you start or shut down the natural barrier between the transmitter should be at least 1ms interval * Input: None * Return value: None */ void AntennaOff(void) { ClearBitMask(TxControlReg, 0x03); } /* * Function Name: ResetMFRC522 * Description: Reset RC522 * Input: None * Return value: None */ void MFRC522_Reset(void) { Write_MFRC522(CommandReg, PCD_RESETPHASE); } /* * Function Name：InitMFRC522 * Description: Initialize RC522 * Input: None * Return value: None */ void MFRC522_Init(void) { digitalWrite(NRSTPD,HIGH); MFRC522_Reset(); //Timer: TPrescaler*TreloadVal/6.78MHz = 24ms Write_MFRC522(TModeReg, 0x8D); //Tauto=1; f(Timer) = 6.78MHz/TPreScaler Write_MFRC522(TPrescalerReg, 0x3E); //TModeReg[3..0] + TPrescalerReg Write_MFRC522(TReloadRegL, 30); Write_MFRC522(TReloadRegH, 0); Write_MFRC522(TxAutoReg, 0x40); //100%ASK Write_MFRC522(ModeReg, 0x3D); //CRC Initial value 0x6363 ??? //ClearBitMask(Status2Reg, 0x08); //MFCrypto1On=0 //Write_MFRC522(RxSelReg, 0x86); //RxWait = RxSelReg[5..0] //Write_MFRC522(RFCfgReg, 0x7F); //RxGain = 48dB AntennaOn(); //Open the antenna } /* * Function Name：MFRC522_Request * Description: Find cards, read the card type number * Input parameters: reqMode - find cards way * TagType - Return Card Type * 0x4400 = Mifare_UltraLight * 0x0400 = Mifare_One(S50) * 0x0200 = Mifare_One(S70) * 0x0800 = Mifare_Pro(X) * 0x4403 = Mifare_DESFire * Return value: the successful return MI_OK */ uchar MFRC522_Request(uchar reqMode, uchar *TagType) { uchar status; uint backBits; //The received data bits Write_MFRC522(BitFramingReg, 0x07); //TxLastBists = BitFramingReg[2..0] ??? TagType[0] = reqMode; status = MFRC522_ToCard(PCD_TRANSCEIVE, TagType, 1, TagType, &backBits); if ((status != MI_OK) || (backBits != 0x10)) { status = MI_ERR; } return status; } /* * Function Name: MFRC522_ToCard * Description: RC522 and ISO14443 card communication * Input Parameters: command - MF522 command word, * sendData--RC522 sent to the card by the data * sendLen--Length of data sent * backData--Received the card returns data, * backLen--Return data bit length * Return value: the successful return MI_OK */ uchar MFRC522_ToCard(uchar command, uchar *sendData, uchar sendLen, uchar *backData, uint *backLen) { uchar status = MI_ERR; uchar irqEn = 0x00; uchar waitIRq = 0x00; uchar lastBits; uchar n; uint i; switch (command) { case PCD_AUTHENT: //Certification cards close { irqEn = 0x12; waitIRq = 0x10; break; } case PCD_TRANSCEIVE: //Transmit FIFO data { irqEn = 0x77; waitIRq = 0x30; break; } default: break; } Write_MFRC522(CommIEnReg, irqEn|0x80); //Interrupt request ClearBitMask(CommIrqReg, 0x80); //Clear all interrupt request bit SetBitMask(FIFOLevelReg, 0x80); //FlushBuffer=1, FIFO Initialization Write_MFRC522(CommandReg, PCD_IDLE); //NO action; Cancel the current command??? //Writing data to the FIFO for (i=0; i<sendLen; i++) { Write_MFRC522(FIFODataReg, sendData[i]); } //Execute the command Write_MFRC522(CommandReg, command); if (command == PCD_TRANSCEIVE) { SetBitMask(BitFramingReg, 0x80); //StartSend=1,transmission of data starts } //Waiting to receive data to complete i = 2000; //i according to the clock frequency adjustment, the operator M1 card maximum waiting time 25ms??? do { //CommIrqReg[7..0] //Set1 TxIRq RxIRq IdleIRq HiAlerIRq LoAlertIRq ErrIRq TimerIRq n = Read_MFRC522(CommIrqReg); i--; } while ((i!=0) && !(n&0x01) && !(n&waitIRq)); ClearBitMask(BitFramingReg, 0x80); //StartSend=0 if (i != 0) { if(!(Read_MFRC522(ErrorReg) & 0x1B)) //BufferOvfl Collerr CRCErr ProtecolErr { status = MI_OK; if (n & irqEn & 0x01) { status = MI_NOTAGERR; //?? } if (command == PCD_TRANSCEIVE) { n = Read_MFRC522(FIFOLevelReg); lastBits = Read_MFRC522(ControlReg) & 0x07; if (lastBits) { *backLen = (n-1)*8 + lastBits; } else { *backLen = n*8; } if (n == 0) { n = 1; } if (n > MAX_LEN) { n = MAX_LEN; } //Reading the received data in FIFO for (i=0; i<n; i++) { backData[i] = Read_MFRC522(FIFODataReg); } } } else { status = MI_ERR; } } //SetBitMask(ControlReg,0x80); //timer stops //Write_MFRC522(CommandReg, PCD_IDLE); return status; } /* * Function Name: MFRC522_Anticoll * Description: Anti-collision detection, reading selected card serial number card * Input parameters: serNum - returns 4 bytes card serial number, the first 5 bytes for the checksum byte * Return value: the successful return MI_OK */ uchar MFRC522_Anticoll(uchar *serNum) { uchar status; uchar i; uchar serNumCheck=0; uint unLen; //ClearBitMask(Status2Reg, 0x08); //TempSensclear //ClearBitMask(CollReg,0x80); //ValuesAfterColl Write_MFRC522(BitFramingReg, 0x00); //TxLastBists = BitFramingReg[2..0] serNum[0] = PICC_ANTICOLL; serNum[1] = 0x20; status = MFRC522_ToCard(PCD_TRANSCEIVE, serNum, 2, serNum, &unLen); if (status == MI_OK) { //Check card serial number for (i=0; i<4; i++) { serNumCheck ^= serNum[i]; } if (serNumCheck != serNum[i]) { status = MI_ERR; } } //SetBitMask(CollReg, 0x80); //ValuesAfterColl=1 return status; } /* * Function Name: CalulateCRC * Description: CRC calculation with MF522 * Input parameters: pIndata - To read the CRC data, len - the data length, pOutData - CRC calculation results * Return value: None */ void CalulateCRC(uchar *pIndata, uchar len, uchar *pOutData) { uchar i, n; ClearBitMask(DivIrqReg, 0x04); //CRCIrq = 0 SetBitMask(FIFOLevelReg, 0x80); //Clear the FIFO pointer //Write_MFRC522(CommandReg, PCD_IDLE); //Writing data to the FIFO for (i=0; i<len; i++) { Write_MFRC522(FIFODataReg, *(pIndata+i)); } Write_MFRC522(CommandReg, PCD_CALCCRC); //Wait CRC calculation is complete i = 0xFF; do { n = Read_MFRC522(DivIrqReg); i--; } while ((i!=0) && !(n&0x04)); //CRCIrq = 1 //Read CRC calculation result pOutData[0] = Read_MFRC522(CRCResultRegL); pOutData[1] = Read_MFRC522(CRCResultRegM); } /* * Function Name: MFRC522_SelectTag * Description: election card, read the card memory capacity * Input parameters: serNum - Incoming card serial number * Return value: the successful return of card capacity */ uchar MFRC522_SelectTag(uchar *serNum) { uchar i; uchar status; uchar size; uint recvBits; uchar buffer[9]; //ClearBitMask(Status2Reg, 0x08); //MFCrypto1On=0 buffer[0] = PICC_SElECTTAG; buffer[1] = 0x70; for (i=0; i<5; i++) { buffer[i+2] = *(serNum+i); } CalulateCRC(buffer, 7, &buffer[7]); //?? status = MFRC522_ToCard(PCD_TRANSCEIVE, buffer, 9, buffer, &recvBits); if ((status == MI_OK) && (recvBits == 0x18)) { size = buffer[0]; } else { size = 0; } return size; } /* * Function Name: MFRC522_Auth * Description: Verify card password * Input parameters: authMode - Password Authentication Mode 0x60 = A key authentication 0x61 = Authentication Key B BlockAddr--Block address Sectorkey--Sector password serNum--Card serial number, 4-byte * Return value: the successful return MI_OK */ uchar MFRC522_Auth(uchar authMode, uchar BlockAddr, uchar *Sectorkey, uchar *serNum) { uchar status; uint recvBits; uchar i; uchar buff[12]; //Verify the command block address + sector + password + card serial number buff[0] = authMode; buff[1] = BlockAddr; for (i=0; i<6; i++) { buff[i+2] = *(Sectorkey+i); } for (i=0; i<4; i++) { buff[i+8] = *(serNum+i); } status = MFRC522_ToCard(PCD_AUTHENT, buff, 12, buff, &recvBits); if ((status != MI_OK) || (!(Read_MFRC522(Status2Reg) & 0x08))) { status = MI_ERR; } return status; } /* * Function Name: MFRC522_Read * Description: Read block data * Input parameters: blockAddr - block address; recvData - read block data * Return value: the successful return MI_OK */ uchar MFRC522_Read(uchar blockAddr, uchar *recvData) { uchar status; uint unLen; recvData[0] = PICC_READ; recvData[1] = blockAddr; CalulateCRC(recvData,2, &recvData[2]); status = MFRC522_ToCard(PCD_TRANSCEIVE, recvData, 4, recvData, &unLen); if ((status != MI_OK) || (unLen != 0x90)) { status = MI_ERR; } return status; } /* * Function Name: MFRC522_Write * Description: Write block data * Input parameters: blockAddr - block address; writeData - to 16-byte data block write * Return value: the successful return MI_OK */ uchar MFRC522_Write(uchar blockAddr, uchar *writeData) { uchar status; uint recvBits; uchar i; uchar buff[18]; buff[0] = PICC_WRITE; buff[1] = blockAddr; CalulateCRC(buff, 2, &buff[2]); status = MFRC522_ToCard(PCD_TRANSCEIVE, buff, 4, buff, &recvBits); if ((status != MI_OK) || (recvBits != 4) || ((buff[0] & 0x0F) != 0x0A)) { status = MI_ERR; } if (status == MI_OK) { for (i=0; i<16; i++) //Data to the FIFO write 16Byte { buff[i] = *(writeData+i); } CalulateCRC(buff, 16, &buff[16]); status = MFRC522_ToCard(PCD_TRANSCEIVE, buff, 18, buff, &recvBits); if ((status != MI_OK) || (recvBits != 4) || ((buff[0] & 0x0F) != 0x0A)) { status = MI_ERR; } } return status; } /* * Function Name: MFRC522_Halt * Description: Command card into hibernation * Input: None * Return value: None */ void MFRC522_Halt(void) { uchar status; uint unLen; uchar buff[4]; buff[0] = PICC_HALT; buff[1] = 0; CalulateCRC(buff, 2, &buff[2]); status = MFRC522_ToCard(PCD_TRANSCEIVE, buff, 4, buff,&unLen); }